Obd and intake temperature sensor
2 posters
Page 1 of 1
Obd and intake temperature sensor
Hello, I have purchased the full version of the application. I also bought a good elm327 interface available in Poland. After the first start I read the OBD2 DTC, OBD2 Monitoring Mode. After a few uses, these functions do not work. Everything else is fine, I can test abs sensors, close doors, turn on wipers...
I think it's not the elm327's fault because the CAR SCANNER application reads errors and shows data from sensors.
When I turn on Monitoring / Live Monitoring, it does not show me the air temperature in the intake, or it shows -40, -38. The sensor is functional, the voltage is 5v, disconnection causes an error.
I think it's not the elm327's fault because the CAR SCANNER application reads errors and shows data from sensors.
When I turn on Monitoring / Live Monitoring, it does not show me the air temperature in the intake, or it shows -40, -38. The sensor is functional, the voltage is 5v, disconnection causes an error.
Shilator- Posts : 3
Join date : 2023-04-15
Re: Obd and intake temperature sensor
Hello,
Thanks for these informations.
We will check and correct this if the error is the software.
Can you confirm this for Voyager V6 3.3L 2001?
Thank You
Thanks for these informations.
We will check and correct this if the error is the software.
Can you confirm this for Voyager V6 3.3L 2001?
Thank You
Papa_Marco- Posts : 13
Join date : 2020-08-03
Re: Obd and intake temperature sensor
Yes. My car is a 3.3 from 2001. Voyager LX.
Thank you.
Thank you.
Shilator- Posts : 3
Join date : 2023-04-15
Re: Obd and intake temperature sensor
Hello,
On 2003 V6 and diesel engines. We found no anomaly.
Is the battery voltage OK and do you have engine modifications?
On 2003 V6 and diesel engines. We found no anomaly.
Is the battery voltage OK and do you have engine modifications?
Papa_Marco- Posts : 13
Join date : 2020-08-03
Page 1 of 1
Permissions in this forum:
You can reply to topics in this forum
|
|